MESHOPIAModel sheet · for your workshop
Other Printer Parts & Upgrades
Pen holder mod for k2van's CR-6 dragon hotend mount
Authorship, licence & source
- Original author
- jantyikt
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/264901
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This is a pen holder mod designed for the Creality CR-6. It is intended to be attached to the k2van's CR-6 dragon hotend mount.
Practical Uses
The holder is designed to accommodate certain pens, such as the Parker Royal Jotter, which will friction fit at the upper part.
Included Parts
- penholder.stl
Printing and Assembly Guidance
To install, unscrew the two M3 screws holding the hotend fan, detach the fan, place the pen holder in the fan's position, and secure it with the two M3 screws. The author recommends printing with PETG to provide desirable flex. Note that some slicer settings will need to be modified.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.