Model information
Description
A simple pen holder mod for the Creality CR-6. The author states it can be attached to the k2van's CR-6 dragon hotend mount. To install, unscrew the two M3 screws that hold the hotend fan, completely detach the hotend fan, place the pen holder in place of the fan, and fix it with the two M3 screws. The author recommends printing from PETG as some flex is somewhat desirable. The author notes that some slicer settings will need to be modified and mentions that universal guides on the internet generally work well. The author states that certain pens will friction fit at the upper part.
Original text by the author on Printables
<p>A simple pen holder mod for the Creality CR-6.<br>You can attach it to this:<br><a href="https://www.printables.com/model/126838-cr-6-dragon-hf-sf-and-orbiter-v15-direct-drive-mou">https://www.printables.com/model/126838-cr-6-dragon-hf-sf-and-orbiter-v15-direct-drive-mou</a></p><p>Unscrew the 2 M3 that holds the hotend fan then completely detach the hotend fan.</p><p>Just put the pen holder in place of the fan and fix it with the 2 M3.</p><p>Print it from PETG as some flex is somewhat desirable.</p><p>You will need to modify some slicer settings. There are many “universal” guides on the internet that generally work well.</p><p> </p><p>Kinda universal, but these kind of pens will friction fit (at the upper part):<br>https://www.parker.hu/parker_parker_royal_jotter_royal_blue_golyostoll#tartalom</p>
There are no comments yet. Verified ratings and makes appear separately below.