＋ Upload

Home/← Back to results/Mechanical Parts/Pan and Tilt Assembly FPV

3D parts · 13

Pan and Tilt Assembly FPV, 3D printable model

BEFORE YOU BUILD

What you need to build it.

Digital files to make. This is not a physical product.

Contents: 13 filesSTL
Declared material: Not specified
Declared compatibility: Not specified
Scale / dimensions: Not specified
Technology / nozzle: Not specified
Supports / orientation: Not specified

Explore the files Preparation & printing Read the licence

Assembly manual

Not identified in the file list

Bill of materials

Not identified in the file list

Documents grouped by filename, without inspecting their contents. Check the author's notes for additional components, electronics and tools; these are not inferred from the photograph.

Check the file list and the author's requirements before downloading. Model dimensions do not establish your printer's minimum build volume.

My preparation before printing0 / 4

Your personal checklist for this visit. Marks are lost when leaving or reloading and are not sent to the creator.

I have reviewed the included parts and documentsReview: I have reviewed the included parts and documents
I have confirmed scale, version and mounting pointsReview: I have confirmed scale, version and mounting points
I have prepared material, orientation and settings for my printerReview: I have prepared material, orientation and settings for my printer
I have read the licence and usage termsReview: I have read the licence and usage terms

0 of 4 items marked by you.

AuthorKilo ↗

Files13 · STL

LicenseCC0 · Public domain

Prepare in my workshop →

Model information

Description

Purpose
This is a dual servo control pan and tilt assembly designed for FPV cameras. The design features a tight form factor and lacks pre-drilled mounting holes to accommodate a wide range of camera models, allowing users to add custom mounting points to the axis.

Practical Uses
The assembly is intended for use in RC planes or FPV setups to provide remote movement of a camera.

Included Parts

Full Assmbly.stl
Spinning Servo Mount.stl
2 of same gear for tilt.stl
Servo.stl
Fpv Axil_.stl
Support mount for Pan.stl
Rubber Band.stl
NEw attectpt v52.stl
Small Pully_.stl
Bottom Plate.stl
Main Pully Pivot_.stl
Servo Mount_.stl
Runcam.stl

Original text by the author on Printables

<p>Pan And Tilt Assmbly For FPV, no holes for mounting b/c of the wide range of cameras, so you can just add your own to the axil, i left space for that.</p>

Authorship, availability and data of the file

Publishing accountMeshopiaManage this tab in Meshopia.

View profile →

Authorship and availability

Hosted for free

Meshopia hosts the package for free download.

Original author: Kilo ↗
Publishing account: Meshopia
Seller: Not applicable · free download
Source: Printables ↗

Essential data

Design sheet

License included: CC0 · Public domain →
Technology: No comprobado
3D design format: 13 filesSTL · 6,3 MB
Publication date: 27 de septiembre de 2026
Design No.: MSH-004644
Original author: Kilo ↗
Last update: 5 de octubre de 2026

✓ Share✓ Modify✓ Commercial use

AvailabilityHosted for freeDeliveryFrom MeshopiaTabDeclared data

Meshopia aloja el paquete gratuito administrado por Meshopia.

File origin

where does it come from

We separate authorship, publication, sale and source so that each responsibility is clear.

External source · printables.comPrintableshttps://www.printables.com/model/1281488↗

Original author: Kilo ↗
Publishing account: Meshopia
Seller: No aplica
Availability: Hosted for free
Source or collection: Printables
Changes made: AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.

Download content

Files included

These files are part of the model download.

13 files · 6,3 MB

Find a fileFormat

List orderWith a 3D preview

13 of 13 files · 6,3 MB in the listed files

STL

Full Assmbly.stlMain 3D view · 3,7 MB

Choose ↓Source ↗

STL

Spinning Servo Mount.stlIncluded in the package · 32 KB

Choose ↓Source ↗

STL

2 of same gear for tilt.stlIncluded in the package · 263 KB

Choose ↓Source ↗

STL

Servo.stlIncluded in the package · 874 KB

Choose ↓Source ↗

STL

Fpv Axil_.stlIncluded in the package · 30 KB

Choose ↓Source ↗

STL

Support mount for Pan.stlIncluded in the package · 12 KB

Choose ↓Source ↗

STL

Rubber Band.stlIncluded in the package · 31 KB

Choose ↓Source ↗

STL

NEw attectpt v52.stlIncluded in the package · 34 KB

Choose ↓Source ↗

STL

Small Pully_.stlIncluded in the package · 115 KB

Choose ↓Source ↗

STL

Bottom Plate.stlIncluded in the package · 21 KB

Choose ↓Source ↗

STL

Main Pully Pivot_.stlIncluded in the package · 145 KB

Choose ↓Source ↗

STL

Servo Mount_.stlIncluded in the package · 10 KB

Choose ↓Source ↗

STL

Runcam.stlIncluded in the package · 1 MB

Choose ↓Source ↗

Meshopia Print Card

Unchecked printing

Not verified

The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.

Ideas that evolve

One design leads to another.

Follow the origin of adaptations and discover what other makers have built from this model.

Checking the source and remixes…

Relationships are declared by the publishing account and must respect the source licence. They do not represent geometric validation or a complete version history.

Community selections

This design, in good company.

Explore public collections featuring this model and find more parts for your project.

All collections →

Finding public collections…

A collection organizes ideas; it does not guarantee that parts fit together. Check scale, chassis and version in each listing. Only public collections from visible profiles are shown. Private collections and their names stay private.

Conversation and organization

Save it with context.

Organize projects in collections and ask about assembly in the comments.

Your projects

Add to a collection

Checking collections…

Choose an existing collection or create one. You control its privacy.

Comments

Questions and contributions

—

Community Evidence

Checking real impressions…

Prepared by the community

Print projects

3MF projects with documented printer, material and settings. Reviewed separately, preserving the creator’s original files.

Always review the content and settings in your slicer before printing. Approval does not certify compatibility with your machine. Files are never executed or sent to printers.

Loading print projects…

How the design evolved

Published versions

Browse the retained publications of this model.

Before downloading

License

CC0 · Public domain

The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.

✓ Share✓ Modify✓ Commercial use

Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.

Publishing account

Meshopia

This account manages the listing on Meshopia. The original author is listed separately in the provenance section.

1750 published designs2047 downloads0 followers0 makes

Message about this model →See full profile →Support →

STL

Space Shuttle Discovery (OV-103)PLA

STL

Tiltable desktop organizer with interchangeable dividersPLA, PETG, ABS

STL

Prusament PETG Functional ClampPETG

Hosted for freeFree

Description

Practical Uses
The assembly is intended for use in RC planes or FPV setups to provide remote movement of a camera.

Included Parts

Full Assmbly.stl
Spinning Servo Mount.stl
2 of same gear for tilt.stl
Servo.stl
Fpv Axil_.stl
Support mount for Pan.stl
Rubber Band.stl
NEw attectpt v52.stl
Small Pully_.stl
Bottom Plate.stl
Main Pully Pivot_.stl
Servo Mount_.stl
Runcam.stl

Original text by the author on Printables

<p>Pan And Tilt Assmbly For FPV, no holes for mounting b/c of the wide range of cameras, so you can just add your own to the axil, i left space for that.</p>