MESHOPIAModel sheet · for your workshop
RC & Robotics
Injora 370 Motor & Transmission Mount (Custom RC Crawler Motor Mount)
Authorship, licence & source
- Original author
- matthew evans
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1553443
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Cars, Crawlers & Off-road
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
This custom-designed motor and transmission mount is engineered specifically for the Injora 370 motor with an integrated transmission. Its primary purpose is to provide a secure, clean mounting solution that ensures proper alignment and stability for the motor/transmission assembly during operation.
Practical uses include DIY chassis builds, custom RC conversions, and RC crawler projects. While designed for use with WPL C14, C24, and C44 platforms, the author notes that fitment may vary based on specific drivetrain configurations and chassis modifications; therefore, test fitting is recommended prior to final installation.
Included Hardware:
To complete the installation, you will need 4 stock mounting bolts/screws for the chassis rails and 4 bolts/screws from the Injora transmission. The author states that no additional extra hardware is required.
Printing and Assembly Guidance:
- Recommended Materials: PLA+ or PETG (PETG is preferred for increased durability).
- Print Orientation: Flat on the print bed.
- Infill: 20–40% recommended for structural strength.
- Supports: Angle the part at approximately 30 degrees and utilize organic supports.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.