Model information
Description
This model is a reproduction of the parts used in the mechanism to obtain two center sticks on the HT-8A.
Practical uses include modifying the HT-8A controller to allow for a double center stick configuration.
Included parts
small arm.stl
long arm.stl
Assembly guidance:
The author states that a small spring or an elastic band with an approximate 14mm distance is required. To complete the build for the long arm, a small piece of 1.75mm filament must be added; the author reports inserting it by force without glue to complete the assembly.
IMAGE PRESENTATION
The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.
Original text by the author on Printables
<p>I reproduce the parts used in the mechanisme to obtain 2 center stick on the HT-8A</p><p>You need the small spring or you can use elastic band, approx 14mm distance for the spring/elastic</p><p>You also need to add a little parts of 1.75mm filament to complete the build for the long arm (i just insert it in force witouth glue and it's make the job)</p>
Questions and contributions