MESHOPIAModel sheet · for your workshop
Other Ideas
H0 Scale Bridge for Märklin C-Tracks
Authorship, licence & source
- Original author
- the_tro
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 11 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/649483
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Trains & Railway
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
This H0 scale bridge is designed for use with Märklin C-tracks. The bridge height is specifically engineered to allow the structure to cross over another track. The author notes that the track inclination represents a compromise between the total required bridge length and the steepness of the track.
Practical uses include expanding model railway layouts by providing elevation for track crossings. The set accommodates two different H0 straight track lengths: 172 mm and 188 mm.
Included parts consist of various pillar files (H0Bridge_pillar1 through H0Bridge_pillar6), track path segments (H0Bridge_Trackpath172.stl and H0Bridge_Trackpath188.stl), and side elements in both lengths, including rounded versions (H0Bridge_Side188round.stl and H0Bridge_Side172round.stl).
Printing and assembly guidance: Each pillar should be printed 2 times. For the track segments, the author recommends printing with supports below both sides. The side elements are designed to be sticked into the track segments during assembly.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.