H0 scale bridge designed for Märklin C-tracks. The bridge height is designed to allow crossing over another track. The set includes track segments available for H0 straight lengths of 172 mm and 188 mm. The side elements (available in both lengths) can be glued into the track segments. The author notes that the track inclination is a compromise between the required total bridge length and the steepness of the track.

Printing instructions:

• Print each pillar 2 times.
• The author prints the track segments with supports below both sides.

Files included: H0Bridge_Side188.stl, H0Bridge_Trackpath172.stl, H0Bridge_Side188round.stl, H0Bridge_Trackpath188.stl, H0Bridge_pillar6.stl, H0Bridge_Side172round.stl, H0Bridge_pillar5.stl, H0Bridge_pillar4.stl, H0Bridge_pillar3.stl, H0Bridge_pillar1.stl, H0Bridge_pillar2.stl