Información del modelo
Descripción
FRC MASCOT HELMET
Purpose
This model was originally created for FRC Team 6996's Koala Mascot, which is located on the side of their robot.
Practical Uses
Designed to be secured via a zip tie, the model features a slot compatible with zip ties measuring 4.7mm wide and 1.2mm thick. It includes a specific internal area for the zip tie head to rest. The author advises "Safety FIRST!"
Included Parts
The download includes the following files:
- Koala Mascot Helmet.3mf
- Pre-sliced .gcode and .bgcode files for i3 Mk3, Mk4s, Core One, and XL printers using 0.4mm nozzles and eSun PLA+.
Printing and Assembly Guidance
The recommended print profile uses a 0.025mm layer height and 5% Grid Infill. The author recommends using variable layer height for the rim of the helmet, noting that printing time will vary depending on whether this setting is enabled.
Attribution: Originally made by the author for FRC Team 6996.
Texto original del autor en Printables
<p>This helmet was orignally made by me for FRC Team 6996's Koala Mascot that we have on the side of our robot. The ziptie slot fits a ziptie of 4.7mm wide and 1.2mm thick, it will fit most ziptie slots, and there is a spot for the ziptie head to rest inside the helmet. Safety FIRST! </p><p> </p><p>Print Profile</p><p>0.025mm</p><p>5% Grid Infill</p><p> </p><p>Variable layer height is recommended for the rim of the helmet. Printing time will be affected whether this value is turned on or off. </p><p>Pre-sliced for i3 Mk3, Mk4s, Core One and XL 0.4mm Nozzles using eSun PLA+</p>
Preguntas y aportaciones