MESHOPIAModel sheet · for your workshop
RC & Robotics
ESC Mount for Losi XXX-CR
Authorship, licence & source
- Original author
- Cranky Cat
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 3 files · STEP · 3MF · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/724136
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
ESC Mount for Losi XXX-CR
Purpose
This model is a small mount designed to hold a brushless ESC within the Losi XXX-CR chassis. It is specifically designed to manage space constraints, allowing the components to fit under the XXX-CR body where room is limited.
Practical Uses
Once attached to the chassis, the ESC is secured to the mount using double-sided tape. This provides a dedicated location for the electronic speed controller in a tight compartment.
Included Parts
- ESC mount (available in .stp, .3mf, and .stl formats)
Assembly Guidance
The mount utilizes existing unused holes located on each side of the battery bay. To install, the holes in the chassis must be tapped using a #4-40 hand tap, and the bracket is then attached with suitable #4-40 screws. The source notes that M3 taps and fasteners may also work for this application.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.