MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
Ender 3 V3 SE CR Touch Spacer for KE/K1 Hotend
Authorship, licence & source
- Original author
- Phamaral
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/783236
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This spacer allows a CR Touch to be used with a V3 KE/K1 hotend when installed in a V3 SE printer. The design is based on the Volcano bracket by T3KPrinter.
Practical Uses
It serves as an adapter to accommodate the specific geometry of the KE/K1 hotend within the V3 SE setup.
Included Parts
V3SE-CRTouchSpacer.stl
Assembly Guidance
Installation requires two longer M3 screws because the original screws will not reach through the spacer. The author used 12mm screws, though 10mm screws may also work.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.