A CR Touch spacer for the V3 KE/K1 hotend installed in the V3 SE. The author based this spacer on the Volcano bracket by T3KPrinter. The author notes that two longer M3 screws are required as the originals will not reach through the spacer; the author used 12mm screws, though notes that 10mm would probably be fine.
Original text by the author on Printables
<p>This is a CR Touch Spacer for the V3 KE/K1 Hotend installed in the V3 SE.</p><p>I based this spacer in the Volcano bracket by T3KPrinter as I did'nt think printing the whole bracket was necessary.</p><p>You will need two longer M3 screws as the originals won't reach through the spacer. I used 12mm but as you can see in the image, they are longer than necessary. 10mm would probably be fine.</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.