MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
Ender 3 S1 Sprite Extruder CR Touch Adjustable Zero Y Offset Mount
Authorship, licence & source
- Original author
- Jeff Li
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/367796
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Ender 3 S1 Sprite Extruder CR Touch Adjustable Zero Y Offset Mount
Purpose
This model is an adjustable mount designed to achieve a perfect zero offset for the CR Touch. It was created to address inaccuracies in printer calibration and to provide a more convenient solution than repeatedly disassembling the extruder from the carriage.
Practical Uses
It is used on the Ender 3 S1 with a Sprite Extruder to allow for fine-tuning the Y offset of the CR Touch. To assist with alignment, the designer recommends printing a small circle (such as a resized cylinder from Cura) in the center of the print bed to serve as a guide for lining up the sensor.
Included Parts
- S1 CR Touch Zero Offset Mount.stl
- S1 CR Touch Zero Offset Arm.stl
Assembly Guidance
Assembly requires four M3 screws and four M3 hex nuts, in addition to the two original screws. The designer recommends placing two washers under the adjustable section of the arm to ensure it holds more evenly.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.