Información del modelo
Descripción
DJI RC-Controller Lanyard Braket
Purpose
This model is a bracket designed to attach a lanyard to the DJI RC-Controller.
Practical Uses
It allows the user to secure the controller via a lanyard. Note that while the design maintains access to the charging port, the "Host" and Micro SD ports are not accessible to avoid increased bulk.
Included Parts
- DJI RC Lanyard Braket (.3mf file)
- Required hardware: Two M4 x 8mm screws (not included)
Printing and Assembly Guidance
For optimal strength, it is recommended to use 4 or 5 perimeters and 4 or 5 solid layers, as the part may bend when hanging from a lanyard. Assembly is completed by using two M4 x 8mm screws to attach the bracket to the controller.
Texto original del autor en Printables
<h5><strong>To attach the braket to the controller you simply use two M4 x 8mm screws.</strong></h5><p> </p><p><strong>I designed it so that the charging port is still accessible</strong>, but the “Host” and Micro SD ports unfortunatly aren't, because than it would've been way bulkier. And I myself don't use the “Host” and Micros SD ports anyway.</p><p> </p><p><strong>Print settings:</strong></p><ul><li>It is best if you use 4 or 5 perimeters, because it likes to bend a bit when you hang it from the lanyard.</li><li>As well as the solid layers, for which I would also use 4 or 5</li><li>Otherwise nothing special</li></ul>
Preguntas y aportaciones