MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
Creality CR Falcon Laser Engraver Cutter 25mm Modular Riser
Authorship, licence & source
- Original author
- Dallin Fort
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1486084
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Creality CR Falcon Laser Engraver Cutter 25mm Modular Riser
Purpose
This modular riser is designed to increase the height of the Creality CR Falcon laser engraver/cutter. Each unit provides a 25mm height increase, and the parts are designed to be stackable to achieve higher elevations.
Practical Uses
These risers allow users to raise the machine without requiring hardware or modifications to the original device. They fit directly over the machine's existing rubber feet and are designed to fit together securely to maintain stability.
Included Parts
- Creality CR Falcon Riser v1.0.stl
- Creality CR Falcon 25mm Riser_v1.0.3mf
Printing and Assembly Guidance
The author reports successful printing using PLA with 15% infill on a K1C printer. To ensure tight tolerance mating surfaces are not compromised by support structures, it is suggested to print the part on its non-mating edge. The author recommends using a glue stick and suggests adding a brim to the supplied file to improve print success. For installation, simply slip the part over the machine's rubber feet; additional units can be added to the stack to increase height further.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.