MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
Creality CR-10 All-In-One (AIO) Prusa Style Case System
Authorship, licence & source
- Original author
- Pewpy
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 10 files · 3MF · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/222579
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Creality CR-10 All-In-One (AIO) Prusa Style
Purpose
This work-in-progress project is designed to reorganize a Creality CR-10 into a Prusa i3 style configuration. The objective is to mount the LCD at the front of the machine while housing the control board, MOSFET, fans, and power supply in the rear. The design utilizes magnets to allow for easy access to the panels.
Practical Uses
This model serves as a housing solution for users looking to consolidate electronics. It is intended for advanced users, as the author notes it is not for beginners. It requires significant custom work, including additional wiring, crimping, connectors, superglue, and fasteners.
Included Parts
The project includes 3MF files for the power supply case and lid, the control box case and lid, and the LCD case (front, back, and mount). STEP files are also provided for the LCD Mount, CR-10 Control Box, and CR-10 power supply to allow for manual alterations.
Assembly Guidance
Assembly requires magnets (to be glued to lids and cases), an LCD cable, heat-set inserts, and wire loom. The author notes that some heat-set inserts may be difficult to install. Additionally, the holes for the power plug and power switch in the power supply case may require manual enlargement by approximately 2mm to accommodate components.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.