Model information
Description
Purpose
This model is designed to replace the original heat sink fan duct to address clogging issues caused by insufficient cooling. The design features unique ventilation intended to increase the printer's filament volumetric capacity by up to 25%.
Practical Uses
This modification is intended for use on the CR-5 Pro H. It is designed to be installed without the use of screws or permanent fixing, though the original metal protection must be removed to use this part.
Included Parts
- CR-5 Pro H Hotend Fan Duct.3mf
Printing Guidance
The author recommends printing in PET-G, ABS, ASA, PP, or NYLON; PLA is not recommended. No supports are required for printing.
Original text by the author on Printables
<p>The model replaces the original version which causes a lot of cloging due to not cooling sufficiently. Unique ventilation increases the printer's filament volumetric capacity by up to 25%.</p><p>Can be printed on PET-G, ABS or superior materials, PLA is not recommended.</p><p>The design was designed to not use screws or permanent fixing.</p><p>It is necessary to remove the original metal protection to use the modification.</p>
Questions and contributions