MESHOPIAModel sheet · for your workshop
Test Models
CR-30 Printmill single wall box flow rate test cube 45 degree
Authorship, licence & source
- Original author
- Matthew Rodriguez
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/487668
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose: This single wall box test cube is designed to calibrate the flow rate for the CR-30 print mill or other print mills. 1.
Practical Uses: The cube is used to determine an ideal flow rate by measuring the thickness of a single printed wall with calipers. To calculate the new flow rate, divide the nozzle width by the measured thickness and multiply the result by the current flow rate.
Printing Guidance: Use the layer height you are targeting. Set the shell count to 1, top layers to 0, and infill to 0. This ensures the cube prints with a single outer layer for measurement.
Included Files:
- 45deg single_wall_box rotated.stl
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.