MESHOPIAModel sheet · for your workshop
RC & Robotics
Configurable Belt Drive for First Stage of Transmission - 1/10 RC Drift
Authorship, licence & source
- Original author
- Katharsis
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 3 files · STEP · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/563917
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Purpose
These pulleys are designed to convert a 1/10 RC drift car to use a belt drive first-stage in place of gears. Note that using a belt drive first stage will reverse wheel rotation, requiring a gear swap in the transmission or ESC reprogramming to correct.
Practical Uses
The pulley profiles are HTD 3mm, though the designer recommends using them with S3M belts to reduce friction. For a 15T/40T pulley setup, a 50T belt is suggested as a starting point. The pinion is intended to press onto a 14T/48P pinion gear.
Included Parts
- Pinion - 15T.step
- Spur - 40T.step
- S3M 15T YinYang.stl
Printing and Assembly Guidance
Print components true to size for best performance. The spur features an 8x16mm bolt circle to fit most drift chassis. The pinion is configurable from 14-20T and the spur is configurable from 36-48T.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.