Model information
Description
Pulleys for converting an RC drift car to have a belt drive first-stage. The author notes that using a belt drive first stage in place of gears will reverse the rotation of the wheels, requiring either swapping gears in the transmission or reprogramming the ESC to correct this. The pulley profiles are HTD 3mm, though the author recommends using them with S3M belts for less friction. The author reports testing that there is no noticeable difference in how the profiles print. A 50T belt is suggested as a good starting point for 15T/40T on the pulleys.
Pinion Notes: The pinion is configurable from 14-20T and is meant to press onto a 14T/48P Pinion gear. The author requests to "print true to size for best performance."
Spur Notes: The spur is configurable from 36-48T and has an 8x16mm bolt circle to fit most drift chassis. The author requests to "print true to size for best performance."
Files included: Pinion - 15T.step, Spur - 40T.step, S3M 15T YinYang.stl
Original text by the author on Printables
<p><strong>Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this</strong></p><p><strong>EDITS:</strong></p><p><i>1/26/24: Added multi-body STL for the yin/yang pinion pulley</i></p><p><i>-----------------------------------------------------------------------------------</i></p><p>Onshape Doc: <a href="https://cad.onshape.com/documents/5078fe1a99d483451fe5524b/w/131b85a4cdf3c4e34dbaccad/e/f559c2146bbfe38831e44b5a">https://cad.onshape.com/documents/5078fe1a99d483451fe5524b/w/131b85a4cdf3c4e34dbaccad/e/f559c2146bbfe38831e44b5a</a></p><p>Belts: <a href="https://www.fingertechrobotics.com/proddetail.php?prod=ft-belt">https://www.fingertechrobotics.com/proddetail.php?prod=ft-belt</a></p><p> </p><p>These are pulleys for converting your RC drift car to have a belt drive first-stage. The pulley profiles are HTD 3mm but I recommend using them with S3M belts for less friction. I have tested it and there is no noticeable difference in how the profiles print. </p><p>A 50T belt is a good starting point for 15T/40T on the pulleys. </p><p> </p><p>Pinion Notes:</p><p>The pinion is configurable from 14-20T and is meant to press onto a 14T/48P Pinion gear. Please print true to size for best performance.</p><p> </p><p>Spur Notes:</p><p>The spur is configurable from 36-48T and has an 8x16mm bolt circle to fit most drift chassis. </p><p>Again, print true to size for best performance. </p>
There are no comments yet. Verified ratings and makes appear separately below.