MESHOPIAModel sheet · for your workshop
Other Gadgets
CC - CYD Centauri Carbon Monitor Modification
Authorship, licence & source
- Original author
- resnbl
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 5 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1647765
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This model is a modification of the CC MINI.STL file provided with the Centauri Carbon printer, designed to house a 2.8" Cheap Yellow Display (CYD) for monitoring printer status. If the riser and glass cover are omitted, the case can function as an informative pencil holder.
Practical uses include mounting a CYD flush with the case face to display status messages. The design features a hole for a USB cable to exit the back and an extended top section.
Included parts:
- cc-monitor-ldr: Case with a hole for an LDR (or LED on newer CYD models)
- cc-monitor-plain: Basic case without an LDR/LED hole
- cc-riser-logo: Riser featuring the Elegoo logo
- cc-riser: Plain riser
- glass: Cover with a handle
Required hardware:
- Right-angle USB (e.g., USB-micro right-angle cable assembly or a USB-C right-angle adapter with a standard USB-C cable). Note: Do not power the CYD with two cables simultaneously.
- Two 6mm M3 bolts
- Two M3 nuts
Printing and assembly guidance:
- All parts require supports.
- The glass cover is designed at 0.4mm thickness (two 0.2mm layers). For a clearer transparent handle, the author suggests printing very slowly with a small layer height, such as 0.1mm. The handle color can be changed after the first 0.4mm of printing.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.