Model information
Description
This model is a riser designed for the BowHouse RC SVT Big Bore mount. According to the author, using the mount alone resulted in a mesh that was too tight, while the official risers sold by BowHouse were too high. This specific version is intended to provide the correct height for stock gearing. The author notes that the height can be adjusted by raising or lowering the part by the required amount to suit specific needs.
Practical Uses:
This part is used as a spacer or riser for the BowHouse RC SVT Big Bore mount to achieve the correct mesh when using stock gearing.
Included Parts
- BowHouseRiser.3mf
Original text by the author on Printables
<p>This is a riser for the BowHouse RC SVT Big Bore mount. With just the mount, my mesh was way to tight, with the risers that bowhouse sells, it was to high. This is juuuust right for the stock gearing. If not, just raise/lower it by your needed amount.</p>
Questions and contributions