Model information
Description
Purpose
This model is a remix for the CR-6se of the adapter plate originally used on the CR-10. It is designed to fit as close as possible to the connector clip without requiring changes or deletions to the existing setup.
Practical Uses
The plate allows for the installation of the BondTech LGX Lite on a CR-6se. It functions as a direct swap with no modifications required to the stock shroud or cables. The included cable guide features a notch designed to capture the ribbon cable using a zip tie head.
Included Parts
- LGX_Lite_CR6se v3.step
- LGX_Lite_CR6se 9422.stl
- LGXlite2CR6SE cable guide v6.step
- LGX_Lite_Cable Guide 9422.stl
Printing/Assembly Guidance
The author reports that all parts were printed using ProtoPasta Carbon Fiber HTPLA at 220°C.
Original text by the author on Printables
<p>This is a re-mix for the CR-6se of the adapter plate used on the CR-10, it fits as close as possible to the connector clip without making changes or deletions.<br>The holes for the printed Cable Guide are the same as on the CR-10, however the guide is too tall for the flat cable. I'll do a re-mix for mine and post it when I'm done. <br>Using this plate, the rest of the installation is the same. Very straightforward and elegant design. Thank you!<br><br>Edit: 9/4/22 Added the files for the cable guide. The notch is for the head of the Zip tie so it captures the ribbon. Enjoy!</p><p>All the parts were printed using the ProtoPasta Carbon Fiber HTPLA at 220c. </p>
Questions and contributions