Model information
Description
Adjustable case for Eachine TX02 / FPV camera
Purpose
This model is an adjustable case designed to protect the Eachine TX02 camera, including its circuit board and antenna. It is specifically intended for mounting on an RC car.
Practical Uses
To secure the camera's orientation within the housing, an M4 screw and nut are used. The entire assembly is attached to the RC car using double-sided tape. The case is secured at the front and rear sections using two cable ties. An additional cable tie can be applied around the base of the housing's antenna area for extra stability.
Included Parts
- Front.stl
- Rear.stl
- Base plate.stl
- Caméra_Eachine_TX02.step
Original text by the author on Printables
<p>Adjustable case for the Eachine TX02 camera.</p><p>Designed to be mounted on a RC car. Use a M4 screw and nut to secure the camera’s orientation. Use double-sided tape to attach the camera to the RC car. Use two cable ties to secure the rear and front sections of the case. You can also use another cable tie around the base of the housing’s antenna area.</p><p>This case is designed to protect the camera, the circuit board, and the antenna.</p>
Questions and contributions