Información del modelo
Descripción
Purpose
This model serves as a demonstration of arc overhangs. It utilizes a script to convert overhang perimeters into arc overhangs.
Practical Uses
The demonstration shows how arc overhangs function. The author suggests that using smaller extrusions or nozzles could allow for smaller arcs that follow perimeters more closely in tight corners.
Included Parts
arcleaf.3mf
BigArcLeaf.gcode
NormalArcLeaf.gcode
Printing/Assembly Guidance
The author provides a generic PETG profile with 0.2LH and 0.6N settings. It is recommended to set the bridge fan speed to 100% for cooling. To use this method, run PRUSA SLICER Gcode through the following script: https://github.com/nicolai-wachenschwan/arc-overhang-prusaslicer-integration. Note that the script prints quite slowly by default.
Texto original del autor en Printables
<p>Generic PETG profile, 0.2LH, 0.6N and set bridge fan speed to 100% (good cooling for arcs recommended). Also note that the script, by default, prints them quite slowly. I didn't spend much time tweaking the settings so I'm sure there's room for improvement.</p><p>If setup with smaller extrusions/nozzles it could allow smaller arcs that would fill in and follow the perimeter closer (like in tight corners).</p><p>Run PRUSA SLICER Gcode through this script (not mine): <a href="https://github.com/nicolai-wachenschwan/arc-overhang-prusaslicer-integration">https://github.com/nicolai-wachenschwan/arc-overhang-prusaslicer-integration</a></p>
Preguntas y aportaciones