Model information
Description
This model is a nut wrench designed for use with RC rims. It features a 7.1mm hex aperture and is intended to facilitate maintenance on RC vehicles.
Practical uses include tightening or loosening nuts on RC car rims. The author notes that the design is compatible with a metallic bit featuring an external shaft diameter of 12mm.
Included parts
- chiave 7.stl
Printing and assembly guidance:
The author recommends printing the model in either PLA or PETG. To ensure durability, the hex zone must be printed with 100% infill; the author achieved this by using 5 wall loops with a modifier. If a different hex size is required, the author offers to publish a new model if the desired hex size and the maximum external shaft diameter are specified.
Original text by the author on Printables
<p>Hex aperture of the model is 7.1mm. External shaft diameter is 12mm (as a metallic bit i have).</p><p>Print in PLA or PETG but make sure the zone of the hex is filled at 100% (i set 5 wall loops with a modifier).</p><p>If you need different hex size, let me know and i publish the model (specify also the shaft external maximum diameter). </p><p></p>
Questions and contributions