Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

3 tagged models · Page 1 of 1

#xt60

Discover 3D models tagged xt60 and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de SpeedyBee Mario5 DC 25mm GPS Mount

SpeedyBee Mario5 DC 25mm GPS Mount

SpeedyBee Mario5 DC 25mm GPS Mount Purpose This model is designed as a rear end mount specifically for the SpeedyBee Mario5 DC. It serves as a structural component to hold various electronic connections and modules in place at the rear of the frame. Practical Uses This mount provides dedicated support for an XT60 plug, dual SMA connectors intended for the O4 pro, and a 25mm x 25mm GPS unit. Included Parts - MARIO5-TPU-XT60_DJI_2_GPS.stl Printing and Assembly Guidance The author recommends printing this model in TPU. When printing, use supports; the author notes that the supports should come off easily.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DJI FPV XT60 Charging Adapter

DJI FPV XT60 Charging Adapter

DJI FPV XT60 Charging Adapter Purpose This model is a simple XT60 to DJI Battery adapter designed to facilitate charging a DJI FPV Battery while in the field or inside a car. Practical Uses It is intended for users who need to charge their DJI FPV batteries using an XT60 power source. The author reports using an ISDT charger in DC mode at 25.1V with 3.4A, though no guarantee is provided regarding performance or compatibility. Included Parts The package includes the DJI_Adapter.STL file. Printing and Assembly Guidance Assembly requires the pins from an XT60 connector. The author notes that these pins fit the printed part after a little modification and can be easily removed using a soldering iron. To complete the assembly, the user should solder another XT60 connector to the opposite end. The author suggests melting the pins into the printed part using the same soldering iron technique used to remove them.

Technology
Sin probar
material
—
Difficulty
Sin especificar