Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

2 modelos etiquetados

#xpress

Descubre modelos 3D etiquetados como xpress y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Xpress Execute FT1S Front bumper

Xpress Execute FT1S Front bumper

A work in progress design for the Xpress Execute FT1S. The author designed this bumper to arch out to provide more side protection than the original. The author notes that a future design may be a complete bumper where the fan mount is removed. V2 is a design that covers the whole front. The author reports the model is made in TPE with 85A flex. Printing instructions: Wall line count: 5 TOP/BOTTOM layer: None Infill: 40% Infill Pattern: Tri-Hexagon (Or honeycomb if you have Prusa slicer)

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Xpress Execute FT1S Bumper, Final

Xpress Execute FT1S Bumper, Final

The author reports using Ninjaflex 85A material. Printing instructions provided: Top/Bottom layer = 0, Walls = 1, Infill = 50%. The author suggests scaling up the Z-value to 12mm (or the desired height). The author states that after 7 hours of racing and hard crashes, the bumper is holding up and working well, noting it is better than the original bumper.

Technology
Sin probar
material
—
Difficulty
Sin especificar