2 modelos etiquetados

#workshop storage

Descubre modelos 3D etiquetados como workshop storage y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

RC Transmitter Wall Brackets with Two Retaining Arms - Five Size Variants STL and 3MF

Store an RC transmitter on a printed wall bracket selected to suit its handle or support interface. The inspected parts have a rounded rectangular backplate, two countersunk mounting holes, two projecting arms with raised end stops, and a curved central clearance. The five variants change the backplate and arm spacing or depth. Six unchanged files are included: five individual STL variants and a 3MF source layout containing the five bracket designs. The source size labels are 58x24, 58x30, 58x40, 68x40 and 68x57 mm. English filenames preserve those labels; they are not independently verified fit dimensions. Measure your transmitter and inspect the actual geometry before choosing a variant. The project refers to plane, drone, car and boat transmitters without specifying verified brand or model compatibility. The new cover shows the five actual bracket variants separately in blue and sand colors. The transmitter, wall, screws, anchors and other mounting hardware from the source photograph are not included. Select suitable fixings for your wall and assess the mounting-hole seating, arm clearances and supported weight. No tested load rating, wall-installation procedure or printing profile was supplied. MESHOPIA has not tested installation, fit, strength or printing settings. The cover renders the actual geometry and shadows in Blender, then composites them over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Stackable RC Car Stand Platforms, Posts and Slotted Display Tray - Eight STL Files

A stackable RC display-stand source project containing three rectangular platform meshes, four separate square posts and one slotted display tray. One platform has four tall posts with stepped tips, one has four shorter posts, and the third is a plain box-like platform. The separate posts also have stepped tips. The additional tray contains a series of parallel slots and is named as a trophy stand in the source. Eight unchanged original STL files are included with descriptive English filenames. The similar loose posts are retained as supplied. No verified vehicle scale, maximum load or model compatibility is supplied. The platform footprint is approximately 250 by 175 source-coordinate units; these numerical coordinates are not a calibrated physical-size claim. The new cover uses all eight actual meshes. The plain platform is placed above the tall-post platform as an illustrative two-tier rack. The alternative short-post platform, four loose posts and the slotted tray are shown separately alongside. The blue rack and sand-colored accessories use a changed angle and a locally generated workshop background. No RC vehicles or trophies are included in the image or download. This visual stack is not a validated assembly; downloadable parts are unchanged. Inspect underside interfaces, post engagement, spacing and stability before fabrication. Check that your vehicle footprint fits each shelf and determine safe loading experimentally. Printing settings, assembly tolerances and a validated load rating are not supplied. MESHOPIA has not tested printing, fit, stability or strength. The cover renders actual meshes in Blender over a background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar