2 modelos etiquetados

#workshop accessory

Descubre modelos 3D etiquetados como workshop accessory y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Flat-Top RC Car Display Stand with Parts Tray - Single STL

Raise a suitable RC car above the work surface with this printable flat-top stand. Inspection of the supplied STL identifies five separate mesh components: a compartmented base with a central socket, a cylindrical support post, a rectangular perforated top plate, and two ring-shaped collars. The base provides six recessed trays for loose parts. The top has grouped circular openings and smaller mounting holes. One STL is included, renamed 01-flat-top-stand-five-part-layout.stl. It contains the five parts in their original separate layout. The geometry and original arrangement in the download are preserved; separate the components in your slicer as appropriate. No vehicle, screws or other hardware are supplied. The MESHOPIA cover uses the actual mesh components, repositioned in Blender to illustrate the base, post and top together. The two collars are shown beside the stand. This is a visualization of component placement; their final seating, fastening, rotation and load capacity have not been physically verified. The pale blue finish, studio angle and stone background were created for the new cover. No vehicle scale is established by the supplied filename. Check the top footprint, clearance and post interfaces against your vehicle before printing. Choose material and orientation for the expected load, inspect supports in the slicer, and test stability before placing a vehicle on the stand. No tested print profile is provided.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Foldable RC Car Stand Platform, Open-Frame Legs and Insert Strips - Thirteen STL Files

A compact folding stand source project supplied as thirteen separate STL files. The geometry includes a rectangular platform with recessed circular openings and long channels, two complementary open-frame leg sections with cylindrical hinge features, four small flat tabs, four longer rounded-end strips and two shorter rounded-end strips. All repeated small pieces remain individual files. Thirteen unchanged original STL files are included with descriptive English filenames. The supplied names do not identify a tested vehicle scale, weight capacity, exact strip material or a validated assembly procedure. The main platform measures approximately 120 by 140 in the source coordinate units; STL does not store an explicit physical unit. Confirm slicer units and intended dimensions before fabrication. The new cover uses the actual meshes in an illustrative folded arrangement, with the two leg sections laid across the platform and the ten small tabs and strips shown separately alongside. Blue, sand and graphite finishes, a different angle and a new workshop background replace the source photograph. The image illustrates the components and does not verify hinge alignment, folding travel, load capacity or assembled function. Check hinge clearances, attachment hardware, strip fit, surface contact and vehicle support requirements before printing or loading the stand. A tested print profile, load rating and verified bill of materials are not supplied. MESHOPIA has not tested printing, fit, strength or stand operation. The cover renders the actual meshes and shadows in Blender and composites them over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar