Whisbang RC whistling bombs
Whistling accessory for RC activities designed to produce sound while moving through the air, without explosive function. Possible uses - add an acoustic effect to a controlled RC demonstration - experiment with airflow and sonic cavities Printing recommendations - As a first test, PLA is a simple option; switch to PETG, ASA, or another material only if the use requires temperature resistance, outdoor use, or higher toughness. - A layer height of 0.20 mm is usually a good starting point; reduce the layer height if you want to prioritize surface detail. - Find a stable face to support the piece and check for overhangs, bridges, and surfaces requiring supports in the slicer. - Print a single unit or a fit test first when there are tolerances, joints, or compatibility with a real object. What to check Do not add pyrotechnics or charges; avoid throwing towards people, animals, or property and respect flight field regulations. As a starting point, the sheet indicates FDM with PLA, PETG; these details must be confirmed in the slicer.
- Technology
- FDM
- material
- PLA, PETG
- Difficulty
- Intermedia