Meshopia · EnglishEnglish
MESHOPIA

2 modelos etiquetados

#vehicles

Descubre modelos 3D etiquetados como vehicles y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de DJI Mavic 3 Pro: referencia 3D para accesorios

DJI Mavic 3 Pro: 3D reference for accessories

Digital reference of the DJI Mavic 3 Pro obtained by the author by converting DJI GLB models to STL format. Its purpose is to serve as support for accessory design or the creation of a scale model. It is not a set of parts to manufacture a flying drone, and the source expressly states this. It also does not provide an independent dimensional verification of the converted models. Preparation, compatibility, and printing Check units, scale, and dimensions against the actual equipment before designing clamps or mounts. A printed scale model can be useful for studying volumes, but it does not validate a fit on its own. The drone's geometry and its fine details may require supports depending on the orientation; check the slicer preview. Material, layer, and infill are not documented.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Separadores de llanta para DKS Pro de DukeDoks

Wheel spacers for DukeDoks DKS Pro

Spacers designed to prevent certain commercial wheels from rubbing against the suspension arms of the DukeDoks DKS Pro. The source offers thicknesses of 1, 2, 3, 4, and 5.5 mm. The fit depends on the wheel, the tire, and the actual configuration; adding spacing also modifies the wheel's position relative to the axle. Preparation, compatibility, and printing The author relates 1 mm to M3 × 16 screw, 2 and 3 mm to M3 × 18, 4 mm to M3 × 20, and 5.5 mm to M3 × 25. Check that the chosen length reaches the nut without bottoming out. Use PLA and perimeters until the section is filled. Before riding, rotate and articulate each wheel to confirm that the rubbing disappears without creating another point of contact.

Technology
Sin probar
material
—
Difficulty
Sin especificar