H0 Scale Bridge for Märklin C-Tracks
This H0 scale bridge is designed for use with Märklin C-tracks. The bridge height is specifically engineered to allow the structure to cross over another track. The author notes that the track inclination represents a compromise between the total required bridge length and the steepness of the track. Practical uses include expanding model railway layouts by providing elevation for track crossings. The set accommodates two different H0 straight track lengths: 172 mm and 188 mm. Included parts consist of various pillar files (H0Bridge_pillar1 through H0Bridge_pillar6), track path segments (H0Bridge_Trackpath172.stl and H0Bridge_Trackpath188.stl), and side elements in both lengths, including rounded versions (H0Bridge_Side188round.stl and H0Bridge_Side172round.stl). Printing and assembly guidance: Each pillar should be printed 2 times. For the track segments, the author recommends printing with supports below both sides. The side elements are designed to be sticked into the track segments during assembly.
- Tecnología
- Sin probar
- Material
- —
- Dificultad
- Sin especificar