XRC RC-2 Rear Suspension Top Arm Inner L/R (Part no. 613007/XRC.613007) 3D Printable Replacement
XRC RC-2 Rear Suspension Top Arm Inner L/R (Part no. 613007/XRC.613007) Purpose This model is a 3D printable replacement for the XRC RC-2S Rear Suspension Top Arm Inner (Left/Right). Note that this is not an exact 1-to-1 dimensionally accurate reproduction; it has been designed to be thicker and chunkier than the original part to accommodate 3D printing. Practical Uses It serves as a replacement component for R/C vehicles using the XRC RC-2S chassis. Because the part is designed to be thicker than the original, the original brass spacer is not required for installation. Included Parts Two distinct versions are available for download: 1. Printed Threads version 2. Threaded Inserts version Printing and Assembly Guidance Assembly requirements depend on the chosen version: For the Printed Threads version: Requires one M5 bolt (30mm or 35mm long) per part. The author notes that 30mm bolts are slightly short and 35mm bolts are slightly long and protrude from the part, but either should function. For the Threaded Inserts version: Requires one M5x10x7 (10mm long, 7mm Outer Diameter) threaded insert, one M8x8x10 or M8x10x10 (8mm or 10mm long, 10mm Outer Diameter) threaded insert, and one M5 bolt (30mm or 35mm long) per part.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar