XRC RC-2 Rear Suspension Top Arm Inner L/R (Part no. 613007/XRC.613007) 3D Printable Replacement
A 3D printable replacement for the XRC RC-2S Rear Suspension Top Arm Inner L/R (Part no. 613007/XRC.613007). The author states this is not an exact 1 to 1 dimensionally accurate reproduction and has been designed to be thicker for printing. The author notes that the original brass spacer is not required as this part is thicker/chunkier than the original. There are two versions available: 1. Printed Threads version: Requires one M5 bolt (30mm or 35mm long) per part. The author notes 30mm is slightly short and 35mm is slightly long and protrudes from the part, but either should work. 2. Threaded Inserts version: Requires one M5x10x7 (10mm long, 7mm Outer Diameter) threaded insert, one M8x8x10 or M8x10x10 (8mm or 10mm long, 10mm Outer Diameter) threaded insert, and one M5 bolt (30mm or 35mm long) per part.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar