Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#steering arm

Descubre modelos 3D etiquetados como steering arm y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de 2006 Artic Cat M7 RC Snowmobile Steering Arm Replacement

2006 Artic Cat M7 RC Snowmobile Steering Arm Replacement

This model is a replacement steering arm designed for a 2006 Articat M7 remote control snowmobile. It is intended to replace a broken original component to restore steering functionality to the RC vehicle. Practical uses include repairing damaged steering mechanisms on compatible RC snowmobiles. Included parts: - 1x RC snowmobile steering arm (rc snowmobile steering arm.stl) Printing and assembly guidance: To ensure part strength, the author recommends using PLA filament with 100% infill. Printing settings suggested by the author include using supports and printing on a textured bed. Recommended temperatures are a nozzle temperature of 210°C and a bed temperature of 60°C.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de UPDATED-LDRC steering arm (ACXWA)

UPDATED-LDRC steering arm (ACXWA)

Purpose: This model is a remix of the ACXWA steering arm designed for LDRC vehicles, featuring a wider head and larger holes compared to the original. 1. Practical Uses: It serves as a replacement steering arm for RC cars. If steering binds at full lock, the designer suggests using a zip tie. 2. Included Parts: - tight_fit_ldrc.stl - bigger_fit_ldrc.stl 3. Printing/Assembly Guidance: This is a high tolerance print. The designer suggests printing the larger version and using superglue or electrical tape to secure it to the servo if necessary. To assemble, center the servo while the car is on before gluing. Attribution: This is a remix of thing:6490991.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar