Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#speedybee

Descubre modelos 3D etiquetados como speedybee y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Speedybee Mario 5 side protectors

Speedybee Mario 5 side protectors

Speedybee Mario 5 side protectors Purpose These components are side protectors designed specifically for use with the SpeedyBee Mario 5 XH frame. Practical Uses While the author states they were only tested with the XH frame, they may also be compatible with deadcat frames. Included Parts - mario_protector_r.stl - mario_protector_l.stl - mario_protector_noholes_r.stl - mario_protector_noholes_l.stl - mario_protector.step - side_usb_r.stl - side_usb_l.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de SpeedyBee Mario5 DC 25mm GPS Mount

SpeedyBee Mario5 DC 25mm GPS Mount

SpeedyBee Mario5 DC 25mm GPS Mount Purpose This model is designed as a rear end mount specifically for the SpeedyBee Mario5 DC. It serves as a structural component to hold various electronic connections and modules in place at the rear of the frame. Practical Uses This mount provides dedicated support for an XT60 plug, dual SMA connectors intended for the O4 pro, and a 25mm x 25mm GPS unit. Included Parts - MARIO5-TPU-XT60_DJI_2_GPS.stl Printing and Assembly Guidance The author recommends printing this model in TPU. When printing, use supports; the author notes that the supports should come off easily.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar