3 tagged models · Page 1 of 1

#side panels

Discover 3D models tagged side panels and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Go-Kart Conversion Parts for an OBZ 1-28 RC Car - STL and 3MF

Give a suitable OBZ RC car a go-kart appearance with this printable conversion collection. The source identifies an OBZ 1:28 car. Inspection of the actual files shows a helmeted upper-body driver holding a steering wheel, a broad front bumper with a sloping nose panel, two curved side panels, an open mounting frame and several small attachment components. The download includes 01-obz-kart-conversion-components.stl, 02-obz-kart-conversion-project.3mf and 03-obz-kart-driver-and-front-bumper.stl. These original source files are preserved. The complete component STL contains separate parts in a preparation layout; the additional driver-and-bumper STL presents the driver and front group together. The 3MF contains its source project arrangement. Inspect the separate objects and any project settings in your slicer. This is a conversion-parts download. The existing OBZ chassis, wheels, tires, motors, batteries, electronics and fastening hardware seen in the supplied installation photograph are not included. Physical compatibility and assembly strength have not been independently tested. Compare mounting positions and clearances with your own vehicle before printing. The 1:28 label comes from the source and does not establish that every part will fit all cars at that scale. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. MESHOPIA has not verified operation or print settings.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Curved RC Jump Ramp with Ribbed Deck and Side Panels - Three STL Files

Create a small RC jump obstacle from a curved deck and two side panels. The inspected deck has a smooth curved running surface with reinforcing ribs underneath and mounting holes along the side rails. The two separate side meshes follow the curved ramp profile and include mounting holes and the original embossed source marking. Three unchanged STL files are included and renamed in English as the ribbed ramp deck and the two supplied side panels. Print-oriented source parts have been rotated and positioned for this illustration; the rendering does not establish fastener fit, a tested assembly procedure or load capacity. The original geometry, ribs, openings and embossed details remain in the downloadable files.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. The RC vehicle and floor setting from the source photograph are not included. Verify the deck-to-panel connections, mounting-hole alignment, underside clearance and ramp footprint before printing. Screws, adhesives and other assembly hardware are not supplied. No verified vehicle scale, jump rating or printing profile was provided. MESHOPIA has not tested jumping, traction, assembly or structural strength. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & Mecánica€4.90

Vulpa 4G 1:14 — burnie222 Three-Color Lettered Side Panels

Two modified side-panel parts for the 1:14 Vulpa 4G articulated dump truck by burnie222. The files separate the panel body, lettering and letter background so you can assign three colors in a compatible multicolor slicer. Only the two upgrade parts are included; the complete truck is sold separately. Credit: original truck design by burnie222, sourced from Cults. These side panels were adapted for a three-color letter/background arrangement. Digital files only; no physical parts are included. Check the three color assignments, layer preview, scale and fit in your slicer. Compatibility and print performance have not been physically tested.

Technology: Sin probar
material: —
Difficulty: Sin especificar