Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

2 modelos etiquetados

#side panels

Descubre modelos 3D etiquetados como side panels y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Go-Kart Conversion Parts for an OBZ 1-28 RC Car - STL and 3MF

Go-Kart Conversion Parts for an OBZ 1-28 RC Car - STL and 3MF

Give a suitable OBZ RC car a go-kart appearance with this printable conversion collection. The source identifies an OBZ 1:28 car. Inspection of the actual files shows a helmeted upper-body driver holding a steering wheel, a broad front bumper with a sloping nose panel, two curved side panels, an open mounting frame and several small attachment components. The download includes 01-obz-kart-conversion-components.stl, 02-obz-kart-conversion-project.3mf and 03-obz-kart-driver-and-front-bumper.stl. These original source files are preserved. The complete component STL contains separate parts in a preparation layout; the additional driver-and-bumper STL presents the driver and front group together. The 3MF contains its source project arrangement. Inspect the separate objects and any project settings in your slicer. This is a conversion-parts download. The existing OBZ chassis, wheels, tires, motors, batteries, electronics and fastening hardware seen in the supplied installation photograph are not included. Physical compatibility and assembly strength have not been independently tested. Compare mounting positions and clearances with your own vehicle before printing. The 1:28 label comes from the source and does not establish that every part will fit all cars at that scale. The new studio cover arranges only supplied geometry into an illustrative conversion layout: the driver and front bumper are shown with the mounting frame and side panels, and seven small source components are placed alongside. No wheel or electronics geometry has been invented. The original downloads retain their source layouts. This visual arrangement is not an assembly instruction or a fit test. MESHOPIA has not verified operation or print settings.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Curved RC Jump Ramp with Ribbed Deck and Side Panels - Three STL Files

Curved RC Jump Ramp with Ribbed Deck and Side Panels - Three STL Files

Create a small RC jump obstacle from a curved deck and two side panels. The inspected deck has a smooth curved running surface with reinforcing ribs underneath and mounting holes along the side rails. The two separate side meshes follow the curved ramp profile and include mounting holes and the original embossed source marking. Three unchanged STL files are included and renamed in English as the ribbed ramp deck and the two supplied side panels. The cover presents the actual parts arranged as an assembled ramp in blue and sand colors. Print-oriented source parts have been rotated and positioned for this illustration; the rendering does not establish fastener fit, a tested assembly procedure or load capacity. The original geometry, ribs, openings and embossed details remain in the downloadable files. The RC vehicle and floor setting from the source photograph are not included. Verify the deck-to-panel connections, mounting-hole alignment, underside clearance and ramp footprint before printing. Screws, adhesives and other assembly hardware are not supplied. No verified vehicle scale, jump rating or printing profile was provided. MESHOPIA has not tested jumping, traction, assembly or structural strength. The cover renders the actual geometry and shadows in Blender, then composites them over a workshop background generated locally in ComfyUI.

Technology
Sin probar
material
—
Difficulty
Sin especificar