Meshopia · EnglishEnglish
MESHOPIA

1 modelo etiquetado

#shock tower

Descubre modelos 3D etiquetados como shock tower y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Shocks Tower for MJX Hyper Go 1:16 RC Car

Shocks Tower for MJX Hyper Go 1:16 RC Car

A shock tower designed for the MJX 1:16 scale Hyper Go buggy to connect front shocks to the frame. The author notes that the shock-attachment hole is slightly small and may require force to fit. The design features a threaded hole that screws directly into the plastic without a nut. Printing instructions from the author: - Orientation: Print with the forward-facing part (relative to the RC car) facing up. - Supports: Use a raft and supports on the build plate only. - Infill/Walls: The author used 100% infill and 10 wall layers. - Material: The author used ASA (noting it is difficult to print) with a bed temperature of 100-105°C, 270°C for first layers, and 250°C thereafter. The author suggests PETG might also work.

Technology
Sin probar
material
—
Difficulty
Sin especificar