MESHOPIAScale modelling & RC3 tagged models · Page 1 of 1
KamAZ Dakar RC wheel hub Purpose This model is a wheel hub designed for mounting onto RC Trophy axles. Practical Uses It is intended for use with 12mm hex axle systems. Included Parts - HUB KAMAZ v1.stl
Alternative wheels for the CyberBrick-based Hornet crawler, proposed by its author to use different tires. The source does not specify inner diameters, widths, or tire references. The title "large wheels" is descriptive and does not replace a measurement comparison. Preparation, compatibility, and printing Measure the tire seat, the axle, and the clearance from the suspension and bodywork. A larger wheel modifies the available space and may require other parts of the assembly. Maintain the original scale during checking and do not scale to adjust only one diameter without checking the rest. No material or print profile is documented.
Purpose: These wheel spacers are designed for the DKS PRO by Dukedoks to allow for the use of different tire dimensions. They prevent suspension arms from hitting the wheel during rotation. Practical Uses: Use these spacers when installing larger or commercial tires that cause interference with the vehicle's suspension arms. Included Parts: - SEPARADOR 1mm.stl - SEPARADOR 2mm.stl - SEPARADOR 3mm.stl - SEPARADOR 4mm.stl - SEPARADOR 5,5mm.stl Printing/Assembly Guidance: The author printed these using PLA with 100% perimeters. When assembling, the screw length must be adjusted to reach the nut inside the hub based on the spacer thickness: - 1mm: M3x16mm - 2mm: M3x18mm - 3mm: M3x18mm - 4mm: M3x20mm - 5.5mm: M3x25mm