Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

9 tagged models · Page 1 of 1

#replacement

Discover 3D models tagged replacement and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Sebart Avanti XS Cockpit Boards - JETI Rex10/RCSW/Unilight compatible

Sebart Avanti XS Cockpit Boards - JETI Rex10/RCSW/Unilight compatible

Sebart Avanti XS Cockpit Boards - JETI RC Purpose These components are designed as replacements for the original wooden cockpit boards used in the Sebart Avanti XS. They provide a mounting solution for specific electronic hardware. Practical Uses These boards are intended for use with the JETI Rex10 and RCSW systems. The design includes compatibility for Unilight adapter components. Included Parts The model consists of two separate files: - Avanti XS Cockpit Board - Front - Avanti XS Cockpit Board - End Printing Guidance The author states that these parts are intended to be printed in PLA.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Remote Control Joystick Replacement

Remote Control Joystick Replacement

Remote Control Joystick replacement Purpose This model serves as a replacement component for a remote control joystick, specifically designed for remote car controls. Practical Uses It is intended to repair or replace a worn or broken joystick on an RC car remote control unit. Included Parts The assembly consists of two separate parts: - RemoteCarControlJoystick - Bottom.stl - RemoteCarControlJoystick - Top.stl Assembly Guidance The two parts are designed to be held together using a small screw.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Battery lid for Himoto MT-203 remote control

Battery lid for Himoto MT-203 remote control

Battery lid for Himoto MT-203 remote control Purpose This model is a replacement battery lid designed for the Himoto MT-203 remote control, intended to replace a broken original component. Practical Uses It serves as a functional cover to secure the battery compartment of the Himoto controller. Included Parts - battery lid for himoto.stl Printing and Assembly Guidance The author printed this part using PETG with 100% infill. For a clean surface finish, it is recommended to print with the outside surface facing up on the build plate and to use supports on the plate.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Alligator L-330 Car Alarm Remote Controller Button Replacement

Alligator L-330 Car Alarm Remote Controller Button Replacement

This model is a replacement button designed for Alligator car alarm remote controllers. It serves as a repair component for users needing to restore functionality to worn or damaged remote buttons. Practical uses include repairing various Alligator remote models. This part is compatible with the following models: L-330, L-330v.3, L-430, L-530, L-530+AS-200, L-730, S-200, S-250, S-275, S-300, S-325, S-350, D-910, D-930, D-810, and D-830. The included part is the alligator l-330.stl file. Assembly guidance: This component requires assembly after printing.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hasbro Tonka Remote Control Steering Wheel

Hasbro Tonka Remote Control Steering Wheel

Hasbro Tonka Remote Control Steering Wheel Purpose This model is a replacement steering wheel designed for a Hasbro Tonka dump truck remote control. The design modifies the original manufacturer's configuration to improve usability. Practical Uses This part serves as a repair or replacement component for a Tonka remote. The author modified the spoke configuration from a "T" shape to an "X" shape, specifically to allow for easier one-handed operation by a toddler. Included Parts - tonka_wheel_with_spokes.stl Printing/Assembly Guidance Not provided.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Replacement steering wheel for RC car controller

Replacement steering wheel for RC car controller

Replacement steering wheel for RC car controller Purpose This model is designed as a replacement part for a broken steering wheel on an RC car controller. The author provides this as a potential alternative to modeling a custom wheel from scratch, though they note it may not suit every specific controller model. Practical Uses It is intended for repairing RC car remote controls where the original steering wheel component has broken. Included Parts - Replacement steering wheel for RC car.stl Printing and Assembly Guidance The author recommends using PLA or PETG material with a 0.20mm layer height and 15% infill. The model does not require supports. For assembly, the design includes a single layer in the middle of the screw hole intended to divide it, allowing for easier piercing with a screw.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Grave Digger RC Tank Tread

Grave Digger RC Tank Tread

This model is designed to provide a replacement tread for the Grave Digger RC Tank. Because the original tank utilizes rubber treads, a breakage prevents the vehicle from functioning properly. This 3D printable model serves as a functional substitute to restore mobility to the tank. 1. Purpose: To provide a replacement part for the Grave Digger RC Tank in the event that the original rubber treads break. 2. Practical Uses: Repairing a non-functional Grave Digger RC Tank. 3. Included Parts: loop tread.stl. 4. Printing and Assembly Guidance: The author recommends printing this model using TPU with standard settings.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Hubadapter Replacement for Carson 1:8 buggy

RC Car Hubadapter Replacement for Carson 1:8 buggy

RC Car Hubadapter Replacement for Carson 1:8 buggy Purpose This model is a replacement hub adapter designed specifically for a Carson 1:8 scale buggy. The designer created this part to address a failure in the original component that prevented a wheel from turning. Practical Uses This part serves as a functional replacement for a broken original hub adapter in a Carson 1:8 buggy, restoring the ability of the wheel to rotate correctly. Included Parts - RC Car Hubadapter Replacement.3mf - CE3_Ben RC Auto Radaufnahme Adapter v4.gcode Printing/Assembly Guidance No specific printing parameters or assembly instructions are provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar