7 modelos etiquetados · Página 1 de 1

#rc trailer

Descubre modelos 3D etiquetados como rc trailer y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

RC & MecánicaGratis

1/10 Scale RC Trailer Toolbox

1/10 SCALE RC TRAILER TOOLBOX Purpose This model is a 1/10 scale tool box designed specifically for use with RC trailers. Practical Uses It serves as a scale accessory for RC trailers. The design includes optional holes in both the lid and the box to allow for the mounting of small magnets to assist with a more secure closure. The author utilized specific magnets from https://a.co/d/7kLJESv for this purpose. Included Parts - Tool Box Lid v5.stl - RC Trailer Tool Box v5.stl Printing and Assembly Guidance For printing, the author recommends using 100% infill and notes that no supports are required. When printing the lid, ensure it is positioned with the top surface flat on the print bed. The author used PLA material for the printed model.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

1:10 RC Crawler Trailer

1:10 RC Crawler Trailer Purpose This 3D model is an RC trailer designed for 1:10 scale vehicles. It is optimized for off-road use, featuring high ground clearance and stable handling characteristics intended for rough terrain and higher driving speeds. Practical Uses Designed for off-road applications, the trailer is suitable for crawling and driving at higher speeds over uneven surfaces. The author has specifically tested this model with the Tamiya CC-01 Amarok. Included Parts The download consists of four STL files (1.stl, 2.stl, 3.stl, and 4.stl). Required Additional Parts (Not Included) To complete the assembly, the following hardware and components are required: - Ball bearing set for Tamiya DT-02 / DT-03 (4 ball bearings) - 4× M3 screws (approximately 20 mm in length) - M3 nuts - Tamiya ball head coupling (or a compatible alternative)

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Tandem-Wheel Expedition Trailer for RC Vehicles - Printable Parts

Build a scale cargo trailer for an RC vehicle using the supplied trailer geometry. The source photograph shows an open rectangular bed with ribbed panels, a triangular drawbar, curved fenders and two wheels on each side. The rendered STL contains trailer panel, frame, hitch and wheel-related geometry, so the package should be inspected as a parts layout before printing. The download contains one STL file, renamed 01-expedition-trailer-parts.stl in English without altering the geometry. Multiple printable elements share that file. The source folder labels the design for 1:10 and 1:12 RC builds, and the original file name refers to 1:12. These labels do not establish verified compatibility with a particular vehicle or towing hitch. Measure the geometry in your slicer and compare the drawbar and running gear with your planned setup. Assembly hardware, fasteners and any additional mechanical components are not separately supplied. The package does not document tested print settings or a complete assembly procedure. Inspect the individual elements and their interfaces before choosing print orientation, supports and material. The new MESHOPIA cover is generated locally using the assembled trailer reference, with a different camera view, colors, lighting and background. It illustrates an assembled appearance; the download contains the original printable geometry, not a physical trailer.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC Transport Trailer Body and Loading Ramps - Two STL Files

Add a transport-trailer body to an RC project with these two source meshes. The main body has a long grooved deck, side rails, a front headboard, a tow-eye form and additional mounting details. The other mesh contains two loading ramps with projecting end tabs. The supplied photograph shows external wheels and a vehicle or equipment load; those items are not included in the supplied meshes. The original files are preserved as 01-rc-transport-trailer-loading-ramps.stl and 02-rc-transport-trailer-body.stl. The first file retains its two-ramp layout. The new cover shows the actual trailer body and both ramps beside it, without inventing wheels, axles, hitch hardware or a carried vehicle. This download is a body-and-ramp set, rather than an independently verified complete rolling trailer. No declared vehicle scale, verified towing interface or tested printing profile was supplied. Check the tow-eye opening, deck dimensions, mounting details, loading-ramp tabs and any required running gear against your project before printing. MESHOPIA has not tested towing, load capacity, assembly or strength. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporte12,45 €

MESHOPIA 20ft Tank Container 1:14 | Detailed STL Kit & Hidden Glue Joints

Build a detailed 1:14 scale 20 ft tank container for an RC transport scene, loading yard or display. MESHOPIA Tank20 combines a hollow cylindrical vessel, dished ends, blue end frames and detailed corner fittings in a modular, glue-assembled kit. **Digital download only.** Printed parts, adhesive, truck, chassis, trailer and equipment are not included. This is the updated R02 kit with corrected upper projections and tank braces. The images are Blender renders, not photographs of a physical print. ### SCALE AND SIZE - Scale: **1:14**. - Nominal exterior: **432.714 × 174.143 × 185.071 mm** (L × W × H). - Hollow tank shell with a nominal **2 mm wall**. - Lower corner aperture centre grid: **418.071 × 161.357 mm**. The outer container envelope follows a standard 20 ft reference. The visible tank, frame and pipework proportions are an independent MESHOPIA interpretation informed by reference imagery; this is not a certified factory replica. ### INCLUDED - **58 unique STL files**: 52 production files for 58 assembly components, plus a calibration cube, glue key, clearance coupons and spacing jig. - Editable Blender project with 11 scenes, assembly and detail views, exploded model and print-part inspection. - English assembly instructions, printing notes, BOM, per-part print recipes, generator scripts and digital validation reports. The hidden keys, sleeves and locating features align the split pieces; three jacket bands cover tank-shell seams. There are no visible assembly screws. Dry-fit the parts, keep the frame square while adhesive cures, then fill and finish any remaining seam marks. Follow the included assembly order and check the clearance samples using your printer and adhesive. Digital checks cover mesh closure, dimensions, corner placement, assembly clearances and sampled assembly paths; individual STL slicing evidence is included. **Physical printing, fit, support removal, adhesive strength and handling tests remain pending.** No payload, stacking, lifting or pressure rating is claimed. Decorative pipework and valves do not make this a functional liquid or gas vessel. The lower fitting grid follows the MESHOPIA DryVan20 reference interface. Verify dimensions against your own chassis and twistlocks; compatibility with commercial systems is not established.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporte14,95 €

MESHOPIA 40ft High Cube Container 1:14 | 4510 Opening Doors & Hidden Joints

Build a detailed 1:14 scale 40 ft High Cube freight container for an RC yard, loading dock or transport display. This MESHOPIA kit has a corrugated shell, ribbed roof, recessed front and two opening rear doors with miniature hinges and latch hardware. **Digital files only.** No printed parts, adhesive, metal stock, trailer, truck, twistlocks or lifting equipment are included. Physical printing, assembly and endurance tests remain pending. ### SCALE AND DIMENSIONS - Scale: **1:14**. - Nominal outside dimensions: **870.857 × 174.143 × 206.857 mm** (L × W × H). - Full-size reference: **12,192 × 2,438 × 2,896 mm**, 40 ft High Cube. - Lower corner opening centre grid: **856.071 × 161.429 mm**. - Rear doorway: **167.143 × 184.643 mm**. The main dimensions and corrugations follow a supplied High Cube drawing. Wall thickness, glue lands, hinge journals and miniature hardware are adaptations for FDM printing. This is an independently modelled scale kit, not a certified engineering replica. The selected reference has no forklift pockets. ### FEATURES AND FILES Corrugated side walls continue across the section joins. The roof and front are ribbed; the two rear doors open and use removable metal hinge pins. Separate latch, keeper and bearing pieces add detail. The kit includes handed corner fittings, a front underside gooseneck tunnel, engraved floor panels, optional EVERGREEN side lettering and MESHOPIA rear marking artwork. The downloadable archive contains the printable model package, project and documentation, including print and assembly information and marking artwork. The body is divided into sections with hidden alignment keys and backing pieces; a lower skirt conceals the floor edge and base joins. Dry-fit sections, keep the sides aligned during curing, and verify clearances before assembling. Check the stated dimensions against your chassis and twistlocks; commercial compatibility is not guaranteed. No payload, lifting or stacking rating is claimed. Images are Blender renders, not photos of a completed physical print.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporte7,45 €

MESHOPIA 20ft Dry Van Container 1:14 | 22G1 Opening Doors & Hidden Glue Joints

Build a detailed 1:14 scale 20 ft dry van container for an RC yard, loading dock or transport display. The MESHOPIA 22G1 kit combines corrugated walls and roof, recessed rear doors, slim corner posts, forklift pockets and separate door hardware. **Digital files only.** No printed parts, adhesive, metal stock, trailer, truck or twistlocks are included. R04 has documented digital checks but has not yet been physically printed, assembled or tested. Images are renders of the model. ### SCALE AND DIMENSIONS - Scale: **1:14**. - Nominal outside size: **432.714 × 174.143 × 185.071 mm** (L × W × H). - Full-size reference envelope: **6,058 × 2,438 × 2,591 mm**. - Lower corner opening centre spacing: **418.071 × 161.357 mm**. ### FEATURES Two rear doors open on four hinges per leaf. The latch cores include handles and end cams; removable metal pins and retaining collars complete the hardware. Internal locating pegs, bonded overlaps and reinforcement keep assembly joints hidden without screws. Corrugations continue across the side-panel joint, which is placed in a trough and backed internally. Four forklift-pocket mouths are modelled through the lower side panels. Optional EVERGREEN side lettering and MESHOPIA markings are supplied as artwork; the printed walls remain smooth for your own finish. ### FILES AND ASSEMBLY The archive includes **31 unique production STL files for 65 printed components**, plus calibration cubes and a latch-rod forming template. It also contains an editable Blender project, English assembly manual, part keys and hardware BOMs, print documentation, dimensions and decal artwork. Assemble and dry-fit the base, floor, sides, roof and doors in the documented order; supply appropriate pins, sleeves, wire and adhesive yourself. Check nominal dimensions and clearances after printing. Compatibility with commercial chassis, twistlocks or RC systems is not established. Forklift-pocket or latch strength has not been physically tested; no lifting, payload or stacking rating is claimed.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar