6 modelos etiquetados

#RC jump ramp

Descubre modelos 3D etiquetados como RC jump ramp y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Braced Jump Ramp for a Losi Micro-B RC Car - STL

Create a jump feature for a suitable small RC car with this single-piece ramp. Inspection of the actual mesh shows a broad curved approach surface, a rectangular outer frame and triangular bracing beneath and along the sides. The source identifies Losi Micro-B; physical fit, jump behavior and vehicle suitability have not been independently tested. The download includes one original STL, renamed 01-braced-micro-b-jump-ramp.stl. The entire ramp geometry is retained. No vehicle, course floor, fasteners or additional ramp sections are included. The cover rotates the supplied mesh to show it resting in an operating orientation. Check the surface width and approach against your intended vehicle and available space. No vehicle scale, load rating or tested slicer profile is supplied. Inspect the model in a slicer and assess material strength and stability before use. The new studio cover renders the actual ramp alone in a blue finish on a pale stone floor, from a different angle than the supplied yellow-ramp photograph.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Two-Part Curved Jump Ramp for Small RC Cars - STL

Create a small RC practice obstacle with this pair of curved ramp meshes. Each source file contains a rising curved deck and side supports. One section carries the original raised text “Bash for a Ride”; the lettering remains part of the unchanged geometry. The supplied photograph shows a vehicle using a joined ramp, but that vehicle is not part of this download. Two original meshes are supplied as 01-curved-rc-jump-ramp-left.stl and 02-curved-rc-jump-ramp-right.stl. Their distinct source shapes are preserved. The new cover presents both sections together without adding a car, connectors or fastening hardware. Check the seam and alignment when arranging the two printed sections. No tested printing profile, declared vehicle scale or verified load capacity was provided. Inspect deck orientation, support requirements, overall dimensions and the joining arrangement in your slicer. Choose print settings and a stable installation suitable for your own vehicle. MESHOPIA has not tested jumping performance or structural strength. The new cover uses teal and copper presentation finishes on a pale wooden workshop surface. Its background was generated locally in ComfyUI; the product was rendered from the supplied geometry in Blender and composited without changing its shape.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Supported RC Jump Ramp - Original STEP and Derived STL

Prepare an RC jumping obstacle from this supported ramp design. Inspection of the supplied CAD conversion shows a broad rising deck, three support plates beneath it and small circular openings in the supports. The source collection identifies Arrma Grom or larger vehicles; physical suitability and load capacity for any particular vehicle have not been independently verified. The original editable CAD file is preserved as 01-supported-rc-jump-ramp.step. A matching mesh conversion is included as 02-supported-rc-jump-ramp.stl for slicing and preview. The STL was derived in FreeCAD with linear deflection 0.05 source units and angular deflection 0.15 radians; the original STEP remains available for comparison. The vehicle in the supplied installation photograph is not included. No tested print profile or verified scale was supplied. Inspect the CAD dimensions, deck orientation, support geometry and fastening openings before printing. Establish a stable installation appropriate for your intended vehicle. MESHOPIA has not tested jumping performance, assembly or strength. The new cover uses teal and copper presentation finishes on a pale wooden workshop surface. Its background was generated locally in ComfyUI; the product was rendered from the supplied geometry in Blender and composited without changing its shape.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Curved Modular RC Jump Ramp with Braced Frame - 3MF

Add a curved launch obstacle to an RC practice course with this supplied ramp mesh. The actual 3MF contains one mesh object showing a rising curved deck, a surrounding support frame and an X-shaped brace at the high end. Small connecting features remain part of the source geometry. The supplied photograph includes an RC buggy beside a ramp; that vehicle is not included. The unchanged source project is renamed 01-curved-modular-rc-jump-ramp.3mf. The new cover rotates the existing geometry into an upright ramp presentation. It preserves the supplied deck and frame without adding a car, extra supports or external hardware. Although the source calls the design modular, this download does not establish an independently tested assembly or a complete course layout. Inspect the model dimensions, mesh structure, deck orientation and any connecting features in your slicer before printing. No verified vehicle scale, tested printing profile or load rating was supplied. MESHOPIA has not tested physical fit, structural strength or jumping performance. The new cover shows the actual ramp in teal on a pale wooden workshop surface. The background was generated locally in ComfyUI; the ramp and its shadows were rendered from the source geometry in Blender and composited without changing its shape.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Curved RC Jump Ramp with Ribbed Deck and Side Panels - Three STL Files

Create a small RC jump obstacle from a curved deck and two side panels. The inspected deck has a smooth curved running surface with reinforcing ribs underneath and mounting holes along the side rails. The two separate side meshes follow the curved ramp profile and include mounting holes and the original embossed source marking. Three unchanged STL files are included and renamed in English as the ribbed ramp deck and the two supplied side panels. The cover presents the actual parts arranged as an assembled ramp in blue and sand colors. Print-oriented source parts have been rotated and positioned for this illustration; the rendering does not establish fastener fit, a tested assembly procedure or load capacity. The original geometry, ribs, openings and embossed details remain in the downloadable files. The RC vehicle and floor setting from the source photograph are not included. Verify the deck-to-panel connections, mounting-hole alignment, underside clearance and ramp footprint before printing. Screws, adhesives and other assembly hardware are not supplied. No verified vehicle scale, jump rating or printing profile was provided. MESHOPIA has not tested jumping, traction, assembly or structural strength. The cover renders the actual geometry and shadows in Blender, then composites them over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Joinable Curved RC Jump Ramps and Connector Strips - Four Ramp Variants and Two Connectors

Printable ramp variants and joining strips from a Losi Micro B/T RC ramp source project. Inspection shows four curved wedge-like ramp meshes with broad rising decks and side holes, plus two long flat connector strips with four holes each. The original, mini and V2 decks have smooth surfaces; the V3 deck has a dense repeating raised surface pattern. These are alternative ramp designs rather than four sections that must all be assembled into one ramp. Six unchanged original STL files are included with descriptive English filenames. Original, mini, V2 and V3 labels follow the supplied file variants; no validated vehicle scale, tire compatibility or ramp load rating is supplied. Losi Micro B/T identifies the intended source project and does not imply official affiliation or verified fit. The new cover displays the four actual ramp variants and the two supplied connector strips separately, in blue and sand tones, from a changed viewing angle over a workshop background. It does not invent a vehicle or add parts absent from the files. The download geometry is unchanged. Check ramp width, deck curvature, joining-hole spacing, fastening requirements and ground stability for your intended vehicle. Additional fasteners and physical vehicles are not included. Material, print orientation, wall thickness and infill should be selected for the intended use after inspection and testing. Tested printing settings, impact resistance and jump performance are not supplied. MESHOPIA has not tested printing, fit, strength or RC driving performance. The cover renders the actual meshes and shadows in Blender over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar