RC Car Body Post Cushion
RC Car Body Post Cushion Purpose This model is an RC car body post cushion designed to support a polycarbonate body once it is mounted on posts. It serves as an alternative to using traditional body clips combined with pieces of foam. Practical Uses These cushions are intended to rest the polycarbonate body on the mounting posts. While the design lacks a small curve at the top, the author suggests this can be achieved by applying heat to prints made from PLA or PETG to create a permanent curve. Included Parts - RC car body post cushion (STL file) Printing and Assembly Guidance The author recommends using TPU as the best material for this part. Successful print tests were conducted using the following settings: - Fiberlogy MattFlex 40D TPU: 4 walls and 100% infill. - PETG: 4 walls and 100% infill. - PLA+: The author notes that PLA+ should also work for this application.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar