Scanner Aid for CR Raptor
Scanner Aid for CR Raptor Purpose This tool is designed to assist with scanning processes. According to the author, it can also serve as an aid for model painting, photography, or displays. Practical Uses It is designed to fit the Creality Raptor pad perfectly, allowing for easy extrusion operation using a finger. Included Parts To complete the assembly, the following components are required: - A steel spacer with a 1/2" OD - A shaft collar with 1/2" ID and 1" OD - A flanged ball bearing for a 1/2" OD shaft (housing OD of 1", protruding on one side only) - Eskonke Retaining Compound 638 (to glue the shaft to the bearing) Printing and Assembly Guidance The author suggests using PLA with 20% gyroid infill and a few walls. If the tool is intended for heavier objects, more walls should be used. For assembly, the author recommends scuffing the bearing housing with sandpaper and using Slow CA with an accelerant to glue the bearing in. The bearing depth and flange size are not critical as the shaft collar manages the depth. The author noted that on their specific unit, they had to Dremel the hole for the shaft collar to ensure a proper fit.
- Tecnología
- Sin probar
- Material
- —
- Dificultad
- Sin especificar