Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

1 modelo etiquetado · Página 1 de 1

#pen holder

Descubre modelos 3D etiquetados como pen holder y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Pen holder mod for k2van's CR-6 dragon hotend mount

Pen holder mod for k2van's CR-6 dragon hotend mount

Purpose This is a pen holder mod designed for the Creality CR-6. It is intended to be attached to the k2van's CR-6 dragon hotend mount. Practical Uses The holder is designed to accommodate certain pens, such as the Parker Royal Jotter, which will friction fit at the upper part. Included Parts - penholder.stl Printing and Assembly Guidance To install, unscrew the two M3 screws holding the hotend fan, detach the fan, place the pen holder in the fan's position, and secure it with the two M3 screws. The author recommends printing with PETG to provide desirable flex. Note that some slicer settings will need to be modified.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar