Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

1 modelo etiquetado

#magnets

Descubre modelos 3D etiquetados como magnets y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Creality CR-10 All-In-One (AIO) Prusa Style Case System

Creality CR-10 All-In-One (AIO) Prusa Style Case System

A work in progress project intended to mount the LCD at the front and house the control board, mosfet, fans, and power supply in the rear. The author reports that panels are accessed via magnets. The author notes that some heat-set inserts were difficult to install and that the power supply holes for the power plug and power switch may need to be enlarged by approximately 2mm, as the author trimmed them manually. Step files are included for alterations. The author states this is not for beginners and will require additional wiring, crimps, connectors, superglue, and fasteners. The author lists the following components used: magnets, LCD cable, heat-set inserts, and wire loom.

Technology
Sin probar
material
—
Difficulty
Sin especificar