Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

1 modelo etiquetado · Página 1 de 1

#fumeclear fc-2003

Descubre modelos 3D etiquetados como fumeclear fc-2003 y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de xTool S1 to Fumeclear FC-2003 exhaust adapter

xTool S1 to Fumeclear FC-2003 exhaust adapter

Purpose This adapter is designed to connect the exhaust from an xTool S1 to a Fumeclear FC-2003 fume extractor. The author states this part allows for a shorter exhaust run compared to using a silicone adapter. Practical Uses It can be used to facilitate a more direct exhaust path. The author notes it may work for other Fumeclear parts or can be remixed to fit different adapters. Included Parts - Exhaust Adapter_final.stl Printing/Assembly Guidance The author designed this part with TPU in mind and reports that it works well with that material. The xTool S1 side has a 90mm inside diameter, and the Fumeclear side has a 66mm outside diameter.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar