Front Body Post for RC Cars - 60 mm Source Label, STL and 3MF
A printable front body-mount post for an RC car, with a wider lower shaft, a reduced upper section, a rounded tip and a line of transverse holes. Both the source folder and the supplied filenames label the design as a 60 mm front body post. That label is retained for identification; MESHOPIA has not independently verified the printed length or vehicle fit. The download contains one STL and one 3MF project for the labeled front post. Both files are renamed in English while preserving their original contents. They are format alternatives in this set, not evidence of two different post lengths. The 3MF may contain project or printer settings that should be reviewed before use. A body shell, chassis, clips and fastening hardware are not included. Check the lower mounting section, hole positions and required height against your chassis and body. Material, orientation, wall thickness and supports should be selected after inspection in a slicer. Physical fit and a tested print profile have not been verified. The MESHOPIA cover is a studio render of the actual STL geometry, using a new gray finish, angle and background. The holes and stepped shaft are retained.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar