Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#fpv camera mount

Descubre modelos 3D etiquetados como fpv camera mount y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Pan and Tilt Assembly FPV

Pan and Tilt Assembly FPV

Purpose This is a dual servo control pan and tilt assembly designed for FPV cameras. The design features a tight form factor and lacks pre-drilled mounting holes to accommodate a wide range of camera models, allowing users to add custom mounting points to the axis. Practical Uses The assembly is intended for use in RC planes or FPV setups to provide remote movement of a camera. Included Parts - Full Assmbly.stl - Spinning Servo Mount.stl - 2 of same gear for tilt.stl - Servo.stl - Fpv Axil_.stl - Support mount for Pan.stl - Rubber Band.stl - NEw attectpt v52.stl - Small Pully_.stl - Bottom Plate.stl - Main Pully Pivot_.stl - Servo Mount_.stl - Runcam.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FPV Camera and Transmitter Mount - 19 x 19 and TS5823 Source Labels - STL

FPV Camera and Transmitter Mount - 19 x 19 and TS5823 Source Labels - STL

Mount a suitable small FPV camera and transmitter together on this compact bracket. The supplied photograph shows an FPV installation on an RC aircraft. Inspection of the actual STL reveals two raised side walls with camera mounting holes, an open central frame, upright rear slots and four rounded mounting feet with holes. One STL is included, renamed 01-fpv-camera-transmitter-bracket.stl. The camera, transmitter, antenna, aircraft, wires and fixing hardware are not included. The original mesh is preserved. Although the filename contains "3mf", the supplied file is an STL. The source identifies a 19 x 19 camera, TS5823 and "No Supports". These are supplied design labels; device compatibility and support-free printing have not been independently tested by MESHOPIA. Compare the actual hole spacing, openings and clearances with your hardware and inspect the part in your slicer. No vehicle scale or tested print profile is supplied. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar